LOGIN
Muhammad Baqar
2
Apprentice
Engineering Student (Project Leader)
 · KarachiPakistan
Share
Report
Get Link
TASK
 Completed
Reward › Contribution Review

Please Let Me Know If You Are Troubling At Any Stage

Please Ask Me If You Troubling At Any Stage Please Let Me Know Where You Guys Have Reached Up To Progress?
Also Remember To Buy The Components Installed In This Car.
I Am Listing All The Components Please Buy Them So I Can Easily Demostrate Each Step.

  1. Arduino Uno
  2. Adafruit Motor Driver
  3. Jumper Wires And Bread Boards
  4. Robot Car Chassis
    5.2 x DC Motors
    6.HC-06 Or HC-05 Bluetooth Module
    These are the 6 very simple Components that you can buy from any Engineering Store Or from Online Purchase…I Would Suggest “Aliexpress”.

This Message Is For Every Member
Thank you

#Arduino #Robots #Robotics

Contributions
Muhammad Baqar

Full info.

16 likes 
Like
Award Contribution
 · KathmanduNepal
Share
Report
Get Link

can you tell me from where we can buy the robotics parts

Like
2 likes 
Award Contribution
Muhammad Baqar
2
Apprentice
Engineering Student (Project Leader)
 · KarachiPakistan
Share
Report
Get Link

You Can Get It From Online Purchase Or Near Electronic Store…For Online. GOTO,
www.aliexpress.com

Like
0 like 
Award Contribution
student
 · PalakkadIndia
Share
Report
Get Link

instead of using adafruit motor drive can we use L293D motor drive IC #

Like
3 likes 
Award Contribution
Mechatronics engineer
 · FaisalabadPakistan
Share
Report
Get Link

yes you can use it but there is 50% increased chance of it that it will burn if motor cross 1A current rating.

Like
1 like 
Award Contribution
Shrey Fadia
8
Top Contributor
Instrumentation Engineering student -- Hardware and coding Expert
 · AhmedabadIndia
Share
Report
Get Link

Ali Azhar For simple one, DC motor will not withdraw 1A current. So no worries. Just go on with L293D Ribin Baby

Like
0 like 
Award Contribution
Shrey Fadia
8
Top Contributor
Instrumentation Engineering student -- Hardware and coding Expert
 · AhmedabadIndia
Share
Report
Get Link

Muhammad Baqar We can use Encoder and Decoder IC for wireless control. HT12E and HT12D. Modules are available which comes in a pair. They work on specific crystal frequency. Encoder emits the signal from the remote on the transmitter side, which will be decoded by the decoder on the receiver side. I have used it in my project, and it worked significantly.

Check out this one:
http://www.amazon.in/ELEMENTZ-WIRELESS-COMMUNICATION-ENCODER-DECODER/dp/B00TLINDDS?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=b69cb958-65e3-4632-bcfd-5e890c101673

Like
1 like 
Award Contribution
Leave a reply...
DISCOVER
CHAT
HIRE
ACTIVITY
FEED
Chat with us!
Help
Write something before you submit it!
Photo updated
Request Sent!
Updated
Copied to Clipboard