The hard way

Materials

1. Acrylic sheet 3 mm thick, 16 cm x 21 cm – 1
2. L-clamp motor holder – 4
3. Nut & bolt pair – 4

Steps

1. Mark holes on the acrylic sheet for L-clamps so that the clamps are at the extreme ends of the sheet when fixed.
2. Drill using a Dremel or a pillar/column drilling machine.
3. Fix clamps to the sheet with nuts and bolts.

The easy way

1. Buy a 4WD chassis from Amazon. India USA
2. Follow the assembly manual and assemble the chassis.

Robert Lancer

#Robots #Robotics #raspberrypi #robotics