LOGIN
John Rodrigues
Mechanical Engineer |certified professional in product design and analysis |MEP Engineer|blogger at designwithjohn.com (Project Leader)
 · HonnavarIndia
Share
Get Link
Report
QUESTION
Open

Which is will be the best design for a mini vacuum cleaner for my project ?

0 like 
Like
Adi Tya
Share
Get Link
Report

We can have something like small platform suction hole in the center of the platform and 4 wheels in the platform (not in the corners). In corners there can be sponge like materials to clean the corner of the rooms as the suction is in the center it won’t reach the corners. The waste extract can be placed at the rear side of the machine to reduce the height so it can even go inside beds and sofas for cleaning or can be placed on top of the machine looks compact.

But in both the ways can’t say about the power usage which m8 increase because of the load if kept up or when pulled because of fiction…

Is it going to be remote controlled then we will need some wifi or Bluetooth signal transmitters…

1 like 
John Rodrigues
Mechanical Engineer |certified professional in product design and analysis |MEP Engineer|blogger at designwithjohn.com (Project Leader)
 · HonnavarIndia
Share
Get Link
Report

Thank you
But please to refer my design

0 like 
John Rodrigues
Mechanical Engineer |certified professional in product design and analysis |MEP Engineer|blogger at designwithjohn.com (Project Leader)
 · HonnavarIndia
Share
Get Link
Report

okay thank you

0 like 
Leave a reply...
DISCOVER
CHAT
ALERTS
DISCUSSIONS
FEED